业务咨询:020-82307670技术支持:18902214712

整机业务

产品详情

IBM Power PS703 and PS704 Blade Server
The IBM BladeCenter® PS703 or PS704 blade server is based on IBM Performance Optimization with Enhanced RISC (POWER®) Architecture technologies. These servers run in BladeCenter units to provide a high-density, high-performance blade server environment using advanced processing technology.

Features and specifications

Features and specifications of the IBM® BladeCenter® PS703 or PS704 blade server are summarized in this overview.

The PS703 is a single-wide blade server. The PS704 is the double-wide symmetric multiprocessing (SMP) unit. They are used in an IBM BladeCenter H (8852 and 7989), BladeCenter HT (8740 and 8750), or BladeCenter S (8886 and 7779) chassis unit.
Notes:
  • Power, cooling, removable-media drives, external ports, and advanced system management are provided by the BladeCenter unit.
  • The operating system in the blade server must provide support for the Universal Serial Bus (USB) to enable the blade server to recognize and communicate internally with the removable-media drives and front-panel USB ports.
Core electronics:

64-bit 2 x POWER7® processors (12S technology)

PS703 single-wide model:
  • 16-way single-wide blade: 2 socket 8-core at 2.4 GHz
  • 16 very low profile (VLP) DIMM slots. Maximum capacity is 128 GB. Supports 4 GB DDR3 and 8 GB DDR3 at 1066 MHz
PS704 double-wide model:
  • 32-way double-wide: 2x8-way base with 2x8-way expansion
  • 32 very low profile (VLP) DIMM slots. Maximum capacity is 256 GB. Supports 4 GB DDR3 and 8 GB DDR3 at 1066 MHz

P7IOC I/O hub

On-board, integrated features:
  • FSP1 Service Processor - IPMI, SOL
  • Two 1 Gb Ethernet ports using 5709S Ethernet controller (two on PS703 , four on PS704)
  • SAS controller
  • USB 2.0
  • 1 Serial over LAN (SOL) console using BMC Ethernet port

Local storage:

  • PS703 : Maximum of one SAS 2.5 in. hard disk drive (HDD) or maximum of two SATA 1.8 in. solid-state drives (SSDs) or none
  • PS704:
    • Maximum of two SAS 2.5 in. HDDs or maximum of four SATA 1.8 in. SSDs or none
    • Valid options:
      • None
      • 1 HDD
      • 2 HDDs
      • 1 HDD and 1 SSD
      • 1 HDD and 2 SSDs
      • 2 SSDs, 3 SSDs, or 4 SSDs
  • SSDs are 200 GB
  • HDDs are 300 GB and 600 GB
  • RAID functions supported

Daughter card I/O options:

  • in the PS703 :
    • Supports one expansion card (CIOv)
    • Supports one CFFh expansion card (combination form factor horizontal high-speed data card)
    • Supports one SAS passthrough using CIOv
  • PS704:
    • Supports two expansion cards (CIOv)
    • Supports two CFFh expansion cards
    • Supports up to two SAS passthroughs using CIOv
Integrated functions:
  • RS-485 interface for communication with the management module
  • Automatic server restart (ASR)
  • SOL through service processor
  • Two Universal Serial Buses (USB 2.0) on base system board for communication with removable-media drives
  • Optical media available by shared chassis feature
Environment:
  • Air temperature:
    • Blade server with power on: 10° - 35°C (50° - 95°F). Altitude: 0 - 914 m (3000 ft)
    • Blade server with power on: 10° - 32°C (50° - 90°F). Altitude: 914 m - 2133 m (3000 ft - 7000 ft)
    • Blade server with power off: -40° - 60°C (-40° - 140°F)
  • Humidity:
    • Blade server with power on: 8% - 80%
    • Blade server with power off: 8% - 80%
PS703 or PS704 size:
  • Height: 24.5 cm (9.7 in.)
  • Depth: 44.6 cm (17.6 in.)
  • PS703: Width: 30 mm (1.14 in.) PS704: 60 mm (2.28 in.)
Systems management:
  • Supported by BladeCenter chassis management module
  • Front panel LEDs
  • IBM Director
  • Hardware Management Console (HMC)
  • Integrated Virtualization Manager (IVM)
  • Energy scale thermal management for power management, power oversubscription (throttling), and environmental sensing
  • Active Energy Manager
  • Concurrent Code Update via Director Update Manager, Inventory Collection, Multiple VIOS, and PowerVM® Enterprise
Clusters support for:
  • IBM Director
  • xCat

Virtualization support for:

PowerVM Standard Edition hardware feature, which provides the Integrated Virtualization Manager, Virtual I/O Server, and IBM Systems Director Management Console (SDMC).

No HMC support

Reliability and service features:
  • Dual alternating current power supply
  • BladeCenter chassis redundant and hot-plug power and cooling modules
  • Boot-time processor deallocation
  • Blade server hot plug
  • Customer setup and expansion
  • Automatic reboot on power loss
  • Internal and ambient temperature monitors
  • ECC, chipkill memory
  • System management alerts
  • Light path diagnostics
  • Electronic Service Agent™ call home capability

Electrical input: 12 V DC

Parts listing, type 7891

The parts listing identifies each replaceable part and its part number.

Figure 1 shows replaceable components that are available for the PS703 and PS704 blade server.

Figure 1. Parts illustration, type 7891. PS703 and PS704 with cover.

Replaceable components are of three types:

  • Tier 1 customer replaceable unit (CRU): Replacement of tier 1 CRUs is your responsibility. If IBM® installs a tier 1 CRU at your request, you will be charged for the installation.
  • Tier 2 customer replaceable unit: You may install a tier 2 CRU yourself or request IBM to install it, at no additional charge, under the type of warranty service that is designated for your blade server.
  • Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.

For information about the terms of the warranty and getting service and assistance, see the Warranty and Support Information document for your blade server that is on the IBM BladeCenter® Documentation CD.

Table 1. Parts listing, type 7891
Index Description CRU part number FRU part number Failing function code (FFC)
(Tier 1) (Tier 2)
  Base system-board and chassis assembly:
  • PS703 with two eight-core POWER7® microprocessors
  • PS704 with two eight-core POWER7 microprocessors
   
  • 74Y3188
  • 74Y3197
Various, seeFailing function codes
  Expansion system-board and chassis assembly:
  • PS704 with two eight-core POWER7 microprocessors
    74Y3206 Various, seeFailing function codes
1 Cover 46C7341      
2 3 Gb SAS pass-through expansion card (CIOv) (option) 46C4069     2506
2 Emulex 8 Gb Fibre Channel expansion card (CIOv) (option) 46M6138     2607
2 QLogic 4 Gb Fibre Channel expansion card (CIOv) (option) 49Y4237     2E13
2 QLogic 8 Gb Fibre Channel expansion card (CIOv) (option) 44X1948     2E14
2 Broadcom 2 port 1 Gb Ethernet expansion card (CIOv) (option) 44W4487     2E34
3 4x InfiniBand DDR expansion card (CFFh) (option) 49Y9976     2624
3 4x InfiniBand QDR expansion card (CFFh) (option) 60Y0927     2625
3 4 Gb Fibre Channel and 1 Gb Ethernet expansion card (CFFh) (option) 39Y9304     2E00, 2E10
3 QLogic 8 Gb Fibre Channel and 1 Gb Ethernet expansion card (CFFh) (option) 44X1943     2E15, 2E35
3 QLogic 2 port 10 Gb Ethernet FCoCEE expansion card (CFFh) (option) 42C1832     2E21, 2E23
3 Broadcom 4 port 1 Gb Ethernet expansion card (CFFh) (option) 44W4488     2E33
4 300 GB SAS small form factor disk drive and screws (4) (option) 42D0628     268B
4 600 GB SAS small form factor disk drive and screws (4) (option) 49Y2023     26D2
4 Hard drive filler 40K5928      
4 Solid-state drive:
  • Solid-state drive carrier (holds up to two solid-state drives)
  • 200 GB solid-state drive
  • 74Y1760
  • 74Y9115
   
  • 26BD
  • 26B4
5 Tray, SAS hard disk drive 31R2239      
6 Memory, 4 GB DDR3, 1066 MHz DIMM 78P0501      
6 Memory, 8 GB DDR3, 1066 MHz DIMM 78P0502      
7 DIMM filler 60H2962      
8 Management card:
  • PS703
  • PS704
 
  • 74Y2681
  • 74Y2681
   
9 Bezel assembly with control panel:
  • PS703
  • PS704
  • 74Y6131
  • 74Y6129
     
9 OEM bezel assembly with control panel 74Y6130      
10 Bezel assembly for expansion unit (PS704) Not applicable      
  Service label:
  • PS703
  • PS704
  • 74Y7457
  • 74Y7458
     
  FRU and CRU label:
  • PS703
  • PS704
  • 74Y7599
  • 74Y7600
     
  Cover warning label 90P4799      
  Miscellaneous parts kit 74Y7699      
  3.0V battery 33F8354      
  RFID tag for North America, Latin America, Asia Pacific 46K5362      
  RFID tag for Europe 74Y7652      
  RFID tag for Japan 46K5364      

在线提交需求

您也可发需求信息至邮箱：wangx@gzcloudinfo.com
  • 欢迎联系云鼎信息
  • 我们期待与您详细的沟通
  • 咨询专线:
  • 020-82307670
  • 早9：00－晚18:00（节假日除外）
  • 售后服务
  • 联系我们
  • 联系我们
  • 020-82307670
  • 传真：020-82327541
  • 邮 箱：xunjia@gzcloudinfo.com

Copyright 2011-2014 All Rights Reserved 广州云鼎信息技术有限公司 版权所有 粤ICP备18106638号

技术支持：英铭广州网站建设
 
QQ在线咨询

 技术

 销售

售前咨询热线
18902214712
微信扫一扫